6382OV Wireless Temperature/Humidity Station With Solar Door

A temperature station with sensor that can be used to measure air, soil or water temperatures.
Product Condition:   New

£295.00

The 6382 Temperature/Humidity Station is similar to an ISS unit in monitoring both temperature and humidity, and is supplied complete with radiation shield. To view the data, a wireless Vantage Pro2 console/receiver or Weather Envoy and Weatherlink must be added.

A maximum total of eight 6382 stations can report back to a single VP2 console (although only two 6382 units can be logged by Weatherlink in addition to the ISS). Each 6382 station accepts only a single temperature/humidity sensor and therefore one station is required for each additional temperature reading to be measured.

Temperature readings from a 6382 unit are transmitted to 0.1°F (or 0.1°C) resolution but can only be received and logged by standard VP2 consoles at 1°F (approx 0.5°C) resolution. Readings received on an Envoy8X unit will retain full 0.1°F (0.1°C) resolution.

Further details about the 6382 Wireless Temperature/Humidity Station and its use are provided on the 'VP Supplementary Sensors, Stations and Accessories' page at our Main Site.

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Copyright 2019 - all rights reserved - prodata associates.
×

Can't find what you're looking for? Search Here or get in Touch!


×
Subtotal: £0.00
×